Description

Product Description

Paket produk Rotary Evaporator IKA RV 3 V yang bisa langsung digunakan di lab Anda.

Paket terdiri dari :

• Main unit Rotary Evaporator RV 3 V
• Recirculating Chiller RC 2 Lite
• Membrane Vacuum Pump MVP 10 Basic
• Vacuum Controller VC 10

Specification

RV 3 V

Type of cooling	vertical
Cooling surface	1500 cm2
Motor principle	DC
Speed range	20 – 300 rpm
Speed tolerance set rotation speed < 100rpm	±1 rpm
Speed tolerance set rotation speed > 100rpm	±1 %
Lift	manual
Stroke	150 mm
Heating temperature range	room temp. – 99 °C
Dimensions (W x H x D)	440 x 530 x 330 mm
Weight	28.3 kg
Permissible ambient temperature	5 – 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
Voltage	100 – 240 V
Frequency	50/60 Hz
Power input	1400 W

 

RC 2 Lite

Appliance type	Recirculating chiller
Class designation acc. DIN 12876	I
Identification according to DIN 12876	NFL
Cooling agent	R290
Cooling agent quantity	70 g
Cooling agent pressure max.	21 bar
Cooling capacity (@20°C)	400 W
Cooling capacity (@10°C)	350 W
Cooling capacity (@0°C)	250 W
Cooling capacity (@-10°C)	140 W
Working temperature	-10 – room temp. °C
Operating temperature min.	-10 °C
Operating temperature max. (with external heating)	70 °C
Temperature display	yes
Temperature control	PT1000
Working temperature sensor	PT1000
Working temperature display	LED
Temperature stability DIN 12876	±0.5 K
Display resolution	0.1 K
Set temperature resolution	±0.1 K
Filling volume	1 – 3.5 l
Pump type	Pressure- / suction pump
Pump pressure max. (0 liters discharge flow)	0.35 bar
Pressure pump (suction side) (0 liter flow)	0.15 bar
Flow rate max. (0 bar back pressure)	18 l/min
Pump connection	M16x1
Permissible ON time	100 %
Dimensions (W x H x D)	225 x 385 x 430 mm
Weight	24.5 kg
Permissible ambient temperature	5 – 32 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 21
RS 232 interface	yes
USB interface	yes
Voltage	230 V
Frequency	50/60 Hz
Power input	250 W
Fuse	2x T10A 250V

 

MVP 10 Basic

Pump rate max. (50/60Hz)	1.7 m³/h
Pump rate max. (50/60Hz)	28.3 l/min
Final pressure without gas ballast	7 mbar
Final pressure with gas ballast	15 mbar
Suction levels	2
Cylinder	2
Connection diameter suction side	10 mm
Connection diameter pressure side	10 mm
Gas ballast valve	yes
Input pressure	7 – 1050 mbar
Speed (50Hz)	1380 rpm
Speed (60Hz)	1680 rpm
Noise at low. pressure	65 dB(A)
Mode automatic	yes
Mode manual	yes
Mode pump %	yes
Mode program	yes
Dimensions (W x H x D)	245 x 155 x 320 mm
Weight	11.5 kg
Permissible ambient temperature	10 – 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 54
Voltage	230 V
Frequency	50/60 Hz
Power input	180 W

 

VC 10

Connection diameter suction side	8 mm
Connection diameter pressure side	8 mm
Connection diameter venting side	8 mm
Input pressure	1 – 1050 mbar
Boiling point detection	yes
Solvent library	yes
Two-point control	yes
Analog speed vacuum control	yes
Display	TFT
Pressure unit / scale	mbar, hPa, mmHg, Torr
Vacuum sensor	yes
Vacuum sensor type	ceramic Al2O3
Pressure max. for pressure sensor	1.6 bar
Measurement range (absolute)	1 – 1100 mbar
Control range	1 – 1100 mbar
Resolution pressure	1 mbar
Measurement uncertainty	1 mbar
Medium temperature (gas)	5 – 40 °C
Vacuum valve	yes
Venting valve	yes
Connection for ext. temperature sensor	PT1000
Temperature unit	°C / °F
Temperature measuring range	-10 – 200 °C
Temperature measurement resolution	1 K
Accuracy of temperature measurement	±1 K
Timer	yes
Time setting min.	1 s
Time setting max.	6000 min
Two dot vacuum control interface	VC2.4
Vacuum speed control interface	MVP 10 digital
Material in contact with medium	Al2O3, PTFE, FPM, PPS
Housing material	PBT
Fastening	stand / clamp
Fastening diameter	16 mm
Mode automatic	yes
Mode manual	yes
Mode pump %	yes
Mode program	yes
Dimensions (W x H x D)	95 x 150 x 110 mm
Weight	1.284 kg
Permissible ambient temperature	5 – 40 °C
Permissible relative humidity	80 %
Protection class according to DIN EN 60529	IP 20
RS 232 interface	yes
USB interface	yes
Voltage	100 – 240 V
Frequency	50/60 Hz
Power input	24 W
Power input standby	2 W
DC Voltage	24 V=
Current consumption	1000 mA

 

Installation & Training

Kami juga menyediakan jasa instalasi dan training untuk produk tersebut, memastikan agar operator bisa menggunakan alat tersebut dengan baik dan sesuai prosedur.

Jasa Instal & training terpisah dan tidak termasuk dari paket ini, hubungi kami untuk informasi selengkapnya.